Welding Back Up Tape

MODEL

SIZE &SHAPES

BS-1

Features

DESIGNED ACCORDING TO THE COMMON WELDING METHOD AND COMPOSED OF GROVE AND SPECIAL JOINTS SO THAT BACK WEDLING GAUGING AND GRINDING ARE NOT NECESSARY.

BACK BEAD IS EASILY ACCOMPLISHED.

SIZE : "L" X "B"

1.600mm X 85mm

2.1000mm X 85mm

MODEL

SIZE &SHAPES

BS-1-1

Features

USED SIMILARLY TO BS-1, BUT ALSO FOR WELDING AL AND MIG OF LESS THAN 10mm THICKNESS,

SIZE : "L" X "B"

1000mm X 85mm

MODEL

SIZE &SHAPES

BS-1W

Features

DESIGNED FOR WELDING IN PARTS WITH WIDE GAPS.

SIZE: "L" X "B"

600mm X 100mm

MODEL

SIZE &SHAPES

BS-1H

Features

USED FOR WELDING IN THE HORIZONTAL POSITION AND CAN PROVIDE BACK BEAD IN THE SAME FLAT POSITION.

SIZE : "L" X "B"

1000mm X 85 mm

MODEL

SIZE &SHAPES

BS-2D

Features

COMPOSED OF NON GROOVE AND FLAT-SHAPED CERAMICS, USED IN CASES OF SMALL GAPS.

SIZE : "L" X "B"

1.600mm X 85mm

2.1000mm X 85mm

MODEL

SIZE &SHAPES

BS-2W

Features

COMPOSED OF LARGE-SIZED CERAMICS AND WIDE AL TAPE.

CAN ALSO BE USED FOR WELDING WITH A HIGH CURRENT.

SIZE : "L" X "B"

1.600mm X 130mm

2.1000mm X 130mm

MODEL

SIZE &SHAPES

BS-2T

Features

DESIGNED FOR WELDING IN "T"JOINT AND "T OVERHEAD" AND HORIZONTAL POSITIONS.

SIZE : "L" X "B"

1000mm X 85mm

MODEL

SIZE &SHAPES

BS-3C

Features

DESIGNED FOR WELDING CHAMFERING PARTS.

SIZE "L" X "B"

1000mm X 85mm

MODEL

SIZE &SHAPES

BS-3M

Features

DESIGNED FOR WELDING A DECLINATION OF 2mm.

SIZE : "L" X "B"

1000mm X 85mm

MODEL

SIZE &SHAPES

BS-4

Features

DESIGNED FOR WELDING ANGLES OF ANY DEGREE(AS SHOWN IN THE PICTURES), COMPOSED OF CERAMICS OF A WIDTH OF 3mm.

SIZE: "L" X "B"

1.1000mm X 85mm X 1/2

2.1000mm X 85mm(A/L BS-4)

MODEL

SIZE &SHAPES

BS-4B

Features

DESIGNED FOR SPECIAL ANGLES AND EASILY CONNECTED WITH BS-1.

SIZE :25.4 mm X 25.4 mm X 85 mm

MODEL

SIZE &SHAPES

BS-5

Features

DESIGNED FOR WELDING IN WIDE GAPS, ESPECIALLY IN SEMI ELECTRO GAS ARC WELDING(SEG,ARC)

SIZE : "L" X "B"

600mm X 130mm

MODEL

SIZE &SHAPES

BS-6

Features

DESIGNED FOR WELDING "T" X "K" AND "V" JOINTS.

SIZE :DIA 7,8,10,12 @

"L" X "B"

600mm X 80mm

MODEL

SIZE &SHAPES

BS-6A

Features

USED SIMILARLY TO BS-6.

SIZE : "L" X "B"

1.600mm X 80mm

2.1000mm X 130mm

MODEL

SIZE &SHAPES

BS-7

Features

USED SIMILARLY TO BS-1, BUT CAN BE USED WITH A HIGH CURRENT.

SIZE : "L" X "B"

600mm X 130mm

MODEL

SIZE &SHAPES

BS-8A

Features

DESIGNED FOR SEMI ELECTRO GAS ARC WELDING INSTEAD OF THE METAL CASE COMMONLY USED NOW.

SIZE: "L" X "B"

600mm X 130mm

MODEL

SIZE &SHAPES

BS-1R

Features

COMPOSED OF A 1/2 LENGTH OF BS-1 AND CAN BE USED FOR WELDING WITH CIRCULAR AND CURVED PARTS.

SIZE : "L" X "B"

1000mm X 85mm

MODEL

SIZE &SHAPES

BS-1L

Features

COMPOSED OF A LONG LENGTH OF BS-1 AND CAN BE USED WITH A PLATE OF LONG LENGTH.

SIZE: "L" X "B"

1000mm X 85mm

MODEL

SIZE &SHAPES

BS-W600

Features

DESIGNED FOR WELDING MANHOLES, ACCESS HOLTES, ETC.

SIZE: REDING:100mm R,150mm R

:200mm R,300mm R

MODEL

SIZE &SHAPES

BS-W600
(FOR PIPES)

Features

DESIGNED FOR WELDING PIPES, ROUND SEAMS, RUSHING PORTS, ETC.

SIZE: REDING:135mm R, 250mm R

:280mm R, 350mm R, 500mm R

MODEL

SIZE &SHAPES

BS-3W

Features

DESIGNED FOR SUBMERGED ARC WELDING.CAN BE USED EASILY AS A CLEAN BACK BEAD.COMPOSED OF NON-ASBESTOS MATERIAL AND AL TAPE FOR A CLEAN BACK SIDE.

SIZE : "L" X "B"

600mm X 50mm

MODEL

SIZE &SHAPES

BS-3WN

Features

DESIGNED FOR AUTOMATIC SUBMERGED ARC WELDING. CAN BE EASILY USED WITH CURVED PARTS WITH MAGNETIC CLAMPS AND EASILY ATTACHES TO "BS-32N" PLATES WITH AL TAPE.

SIZE: "L" X "B"

: 600mm X 140mm